Ricoh FW780 Service Manual page 203

[H]
[E]
[B]
1. Lower the feet [A] so that the table does not move while the roll feeder is
being installed on the table and the copier.
NOTE: Do not place the roll feeder unit [B] onto the floor roughly, to prevent
the left and right covers from being damaged.
2. Remove the shipping tapes [C] and shipping cushions [D].
3. Remove the left and right covers [E and F] (3 screws each).
4. Remove the front cover [G] (2 screws) and lower the front cover arms [H] to
the down position.
SM
[A]
[C]
[C]
[G]
7-11
[H]
[F]
[D]
[C]
A163