Ricoh FW780 Service Manual page 251

A252I511.WMF
[E]
8. Remove two shipping cushions [A].
9. Open the original feed unit [B], manual feed table [C], and toner supply cover
[D]. Remove a sheet [E] covering the developer entrance. Pour 1 kg of the
developer [F] into the development unit evenly across its width as shown.
NOTE: Close the paper path section while opening the toner supply cover.
Otherwise, the toner supply cover will drop.
10. Plug in the power supply cord and turn on the main switch.
SM
[B]
[A]
[F]
[D]
A252I504.WMF
3-7
INSTALLATION PROCEDURE
[C]
A252I503.WMF
A251/A252