Ricoh FW780 Service Manual page 354

INSTALLATION PROCEDURE
[E]
17. To enter the SP mode, press the following keys on the operation panel:
Clear key [A]
+ key [B]
– key [C]
Clear/Stop key [D]
Clear/Stop key [D] again and hold for at least 3 seconds.
18. After 3 seconds. The roll paper end and call service indicators will blink (SP
mode).
19. Using the + and – keys, select 36. Enter "1" by pressing the following keys.
Function Select key [E]
+ key
RF Select key [F]
This begins the developer initialization. Initialization takes about five
minutes, after which the copier will automatically return to the normal
operation mode.
B047/B048
[C] [B] [F]
3-10
[A]
[D]
B435I508.WMF
SM