Ricoh FW780 Service Manual page 263

[A]
[H]
[E]
[B]
1. Lower the feet [A] so that the table does not move while the roll feeder is being
installed on the table and the copier.
NOTE: Do not place the roll feeder unit [B] onto the floor roughly, to prevent the
left and right covers from being damaged.
2. Remove the shipping tapes [C] and shipping cushions [D].
3. Remove the left and right covers [E and F] (3 screws each).
4. Remove the front cover [G] (2 screws) and lower the front cover arms [H] to the
down position.
SM
A571I500.WMF
[C]
[G]
A571I502.WMF
3-19
INSTALLATION PROCEDURE
[C]
[H]
[F]
[D]
[C]
A571I501.WMF
A251/A252