Ricoh FW780 Service Manual page 375

4. SERVICE TABLES
4.3 SERVICE TOOLS
4.3.1 SERVICE PROGRAM MODE
Service Program Mode Table
1. A "*" before the mode number means that the mode can be accessed by
customers or sales representative.
2. In the data column, the default value is printed in bold letters.
The default settings for several items depend on the machine destination (refer
to page 4-28.).
Mode No.
Fusing
Temperature 1
(Normal)
*1
Fusing
Temperature 2
*2
(High)
Fusing
Temperature 3
*3
(Low)
Copy Count
*4
Up/Down
Beeper On/Off
*5
Paper Feed Out
Waiting Time
Setting
*6
Manual Feed Start
Time Setting
*7
SM
Function
Selects the fusing temperature for
plain paper.
Selects the fusing temperature for
translucent paper.
Selects the fusing temperature for
translucent film.
Select weather the user display panel
counts up or down.
Turns the beeper on and off.
Sets the copy time-out. Begins timing
when a sheet of copy paper has been
manually fed, or if the Roll Feed Select
key is pressed. If a copy is not made
within the specified time limit, the copy
paper is ejected.
Sets the manual feed delay. The timer
begins when the entrance sensor
detects the paper's leading edge.
Once the specified time has passed,
the registration rollers start rotating.
4-1
SERVICE TOOLS
Data
0: Mode 1
1: Mode 2
2: Mode 3
3: Mode 4
4: Mode 5
5: Mode 6
6: Mode 7
0: Mode 5
1: Mode 6
2: Mode 7
3: Mode 8
0: Mode 2
1: Mode 3
2: Mode 4
3: Mode 5
0: Up
1: Down
0: On
1: Off
2: Turn the beeper off
when holding the button
down to rapidly change
the edge margin or
paper length.
0: 2 minutes
1: 1 minute
2: 3 minutes
3: 4 minutes
4: 5 minutes
0: 2 seconds
1: 0.7 second
2: 1 second
3: 3 seconds
4: 4 seconds
5: 5 seconds
B047/B048