Ricoh FW780 Service Manual page 272

SERVICE TOOLS
Mode No.
Synchro-cut
Length Adjustment
*19
Fixed Paper Size
Pattern Setting
*22
*33 Not Used
Semi-synchro-cut
48 Length Adjustment
Main Motor Speed
Adjustment
49
Copy Number
Limit Setting
56
57 Not Used
Repeat Copy
Length Limit
58
Setting
Machine
67 Operation Counter
Total Copy Length
69 /Number Display
(Feet)
Developer
Initialization
Number Counter
80
Toner End
Number Counter
81
A251/A252
Function
Adjusts the cut length in the semi-synchro
cut mode (A251 copier).
Adjusts the cut length in the synchro cut,
preset cut, and variable cut modes (A252
copier). The setting can be changed by a
key operation.
"42.0" size is added to the following modes
in the inch mode: Refer to the A163 copier
manual and page 4-13 of this manual for
details.
0, 1, 2, 3, 4, 7, 8, 9, 11, 12, 13, and 18
Adjusts the cut length in the semi-synchro
cut mode (A251 copier only).
(Jam code numbers have been changed
from those used in the A163 copier.) If the
main motor speed is incorrect, rJ98 or rJ99
will be indicated when a long copy is made.
In these cases this adjustment is required.
Determines the maximum copy number. The
default settings for the A251 and A252
copiers are different.
Determines the maximum copy length for
repeat copy (A252 copier only).
Displays the total time (hours) of the
machine operation (total time of the motor
rotation).
Displays the total copy length by feet.
Displays the total number of developer
initializations (SP36). Also displays the
developer counter (SP77) at the last
developer initialization.
Displays the total number of toner end
conditions (dtE). Also, displays the toner
counter (SP78) at the last toner end
condition (Hdt).
4-2
Data
-
25 (Shorter) 0 25
(Longer)
1 mm/step
-10 (Shorter) 0 10
(Longer)
0.1 %/step
0: Standard
-9 0 11
0: 99 sheets (A251)
1: 10 sheets (A252)
2: 20 sheets
3: 30 sheets
4: 40 sheets
5: 50 sheets
6: 60 sheets
7: 70 sheets
8: 80 sheets
9: 90 sheets
0: 1,200 mm/48 inch
1: The maximum paper
length determined by
SP55.
dc = X,XXX
SP69: t6 =XXX,XXX
dnF = XX (total number
of developer
initializations)
Hde = XX,XXX
(developer
counter at the
last developer
initialization
dtE = XX
Hdt = XX,XXX
SM