12. Set the multimeter range at dc 200 A.
13. Select SP mode No. --16.
14. Press the
15. Check the multimeter. Press the
using
2.5 A.
16. If the voltage is within that of the standard voltage, press the
17. Select SP mode No. --17.
18. Press the
19. Check the multimeter. Press the
using
2.5 A.
20. If the voltage is within that of the standard voltage, press the
SM
key to turn on the separation corona.
and
keys so that the dc separation current is dc --20
key to turn on the separation corona.
and
keys so that the dc separation current is dc --20
key and then change the current
key and then change the current
5-25
Rev. 5/95
key.
key.
A163