Ricoh FW780 Service Manual page 410

COPY QUALITY ADJUSTMENT
5.8 COPY QUALITY ADJUSTMENT
5.8.4 REGISTRATION ADJUSTMENT
Registration is not within the registration tolerance.
When:
To maintain proper registration.
Purpose:
0 3 mm (0 0.12
Registration
Tolerance:
SP#-5 (by-pass feed), SP#-29 (B048 rear original feed), SP#-45 (roll
Perform:
feed)
Change the start timing of the registration roller using SP#-5, SP#-27,
How:
and/or SP#-45
1. Make several copies using manual feed or the roll feeder and check the
registration.
2. If the registration is not within the registration tolerance, adjust the registration
using SP#-5, SP#-29 and/or SP#-45.
NOTE: When SP#-5 is changed, the data in SP#-45 will be automatically set to the
same value. To adjust SP#-45 separately, you must change it after
adjusting SP#-5.
B047/B048
")
5-4 SM