[A]
[E]
B435I101.WMF
[C]
B435I104.WMF
5. Pull out the paper tray [A] and install the left [B] and right [C] joint brackets (2
screws each: blue).
6. Remove the paper tray stopper [D] (1 screw).
NOTE: After the copier has been placed on the roll feeder, the paper tray can
be pulled out and the paper tray stopper can be removed.
7. If necessary, adhere the appropriate language cutter blade caution decal [E]
over the English decal on the paper tray as shown.
SM
INSTALLATION PROCEDURE
[D]
3-23
[B]
B435I105.WMF
B435I127.WMF
B047/B048