Ricoh FW780 Service Manual page 365

[E]
!
CAUTION
1. Unplug the main machine's power cord before starting the following
procedure.
2. Before starting the installation, make sure the machine is level.
3. The copier is very heavy (85 kg, 187 lbs). To avoid serious injury, make
sure that you have a sufficient number of people to assist you. It takes
at least two people to lift the copier safely.
4. Please be careful not to get your hand caught under the copier as you
place the copier onto the roll feeder.
1. Lower the feet [A] (4 feet) so that the roll feeder [B] does not move while the
copier [C] is being installed.
!
CAUTION
Do not open the paper tray until the copier is placed on top of the roll
feeder. The paper tray drawer is very heavy. Without the copier weight to
hold it down, the roll feeder will fall over. The tray is shipped with a safety
latch holding the drawer shut.
2. Place the copier on the roll feeder. Fit the copier feet [D] into the roll feeder
holes [E].
!
WARNING
The copier is not attached to the roll feeder. Pushing the copier too hard
may cause it to fall. While moving the copier, always push the roll feeder.
SM
INSTALLATION PROCEDURE
[C]
[A]
B436I102.WMF
3-21
[D]
[E]
[B]
B047/B048