Ricoh FW780 Service Manual page 376

SERVICE TOOLS
Mode No.
Leading Edge
Increase/Decrease
Speed Setting
*8
Auto Reset Time
Setting
*9
Auto Energy Saver
Mode
*10
Screen Message
Setting
*11
Leading Edge
Increase/Decrease
Adjustment
Preliminary Interval
*12
Original Feed Out
Waiting Time
Setting
*13
Original Feed Start
Time Setting
*14
Auto Shut-off Time
*15
Setting
Original Hold Mode
*16
B047/B048
Function
This sets the speed at which the
leading edge setting increases or
decreases.
When the customer holds down the +
or – key, there is a brief pause. After a
selected number of 0.25 second
intervals (See SP 12), the values begin
to change at the selected speed.
Sets the delay for the auto reset. After
finishing a copy job, the machine will
wait the specified amount of time. If no
other jobs are begun, it will then
automatically reset the copy settings to
its default values.
Enables and disables the auto energy
saver mode. If enabled, the machine
will automatically go into energy saver
mode after it auto resets.
Selects one of the options indicated on
the display in the energy saver mode.
When the user hold downs the + or –
key to change the leading edge
margin, print number or paper length,
there is a pause before the values
begin to change rapidly.
This paused is measured in 0.25
second intervals.
Sets the original time-out. The timer
begins when an original is placed on
the original table in manual feed mode
(B048 copiers only). After the selected
time, the original is automatically
ejected.
Sets the delay between when the
original entrance sensor or original
rear sensor is actuated, and when the
original feed roller begins rotating
(B048 copier only).
Determines the auto shut-off time.
After original scanning is finished, the
original exit roller stops before
completely feeding out the original.
This prevents the original from falling
onto the floor after scanning.
The original is fed out when the !
key is pressed or when the next
original is inserted into the rear feed.
(B048 copier only).
4-2
Data
Changes every:
0: 0.1 second
1: 0.50 second
2: 0.25 second
3: 0.05 second
4: 0.02 second
0: 2 minutes
1: 1 minutes
2: 3 minutes
3: 4 minutes
4: 5 minutes
5: No auto reset
0: No
1: Auto Energy Saver
Mode
0: None
1: Pre-HEAt
2: Hello i lovE yoU
3: 0 1 2 3 4 5 6 7 8 9
4: SLEEPinG
5: HavE A Good dAy.
0: 3 intervals
1: 1 intervals
2: 2 intervals
3: 10 intervals
0: 2 minutes
1: 1 minute
2: 3 minutes
3: 4 minutes
4: 5 minutes
5: No auto feed out
0: 1 second
1: 2 seconds
2: 3 seconds
3: 4 seconds
4: 5 seconds
5: 6 seconds
6: 7 seconds
1 240
30
0: No
1: Original Hold mode
SM