Ricoh FW780 Service Manual page 101

How to change settings
1. Access the SP mode and select the program number.
2. Press the
indicator beside the
3. The present setting is displayed in the paper length indicator.
4. Select the setting using the
key to enter the selected setting.
5. Leave the SP mode.
How to read data
1. Access the SP mode and select the program number.
2. Press the
indicator beside the
3. Press the
4. Press key again to stop displaying the data.
SM
key to select the paper length indicator (the four digit
mark).
and
key and select the paper length indicator (the four digit
mark).
key, then the paper length indicator shows the data.
4-9
keys, then press the
A163