Multi-Sensor Error; Error In Cutter Position - Canon imageprograf ipf755 User Manual

Error Message > Other Messages

Multi-sensor error

Direct sunlight or strong lighting may be shin-
ing on the printer and causing the sensor to
malfunction.
The performance of a sensor inside the printer
may be impaired.

Error in cutter position.

The Cutter Unit stops in the middle of cutting.
13
902
Multi-sensor error
Downloaded from ManualsPrinter.com Manuals
>
Cause
Cause
1. Push the Release Lever back and remove the paper.
2. Pull the Release Lever forward.
Corrective Action
Take steps to ensure the printer is not used when exposed to direct
sunlight or strong lighting.
Turn off the printer and wait at least three seconds before restoring
the power.
If the message is displayed again, contact your Canon dealer for as-
sistance.
Corrective Action
iPF755