Using Your Server; Front Bezel - NEC Express5800/120Rh-2 User Manual

USING YOUR SERVER

This section describes basic operations of the server including how to use devices such as the floppy
disk drive and the CD-ROM drive. See Appendix B for notes on using the floppy disk, CD-ROM,
and accessories including the keyboard and the mouse.

Front Bezel

Remove the front bezel to power on/off the server, to access the floppy disk drive, CD-ROM drive,
and a removable media device, and to install/remove hard disk drives to the 3.5-inch disk bays.
IMPORTANT:
To open the front door, you must unlock the door with the provided
security key.
Pay attention not to press the POWER switch when you install or
remove the front bezel.
Installing or Removing the Front Bezel
When turning the power of the server on/off, accessing to the floppy disk drive, CD-ROM drive, or
a removable media device, or installing or removing a hard disk drive on or from the 3.5-inch disk
bay, first remove the front bezel.
IMPORTANT:
it by using the attached security key.
1.
Insert the attached security key into the key slot and turn the key to the front bezel side
with it pressed lightly to release the lock.
2.
Hold the right end of the front bezel lightly to pull it toward you.
The front bezel can be opened only when you unlock
General Description
Unlock
2-29
Lock