Power Supplies; Peripheral Bays - NEC Express5800/120Rh-2 User Manual

Power Supplies

The power supply consists of the power supply bay and one power supply module. A second power
supply module can be purchased to provide a redundant, 1+1 system. With either configuration, the
power supply provides 600 watts of power and is designed to minimize EMI.
The power subsystem supports implementation of remote management features including remote
enable that permits power to be activated from a variety of sources.

Peripheral Bays

Your server supports a variety of standard PC AT-compatible peripheral devices. The chassis
includes these peripheral bays:
An optional removable media front panel bay for mounting a half-height 3.5-inch
peripheral device such as an optional tape drives
Depending on your configuration, your server includes six hot-swap SCSI hard disk drive
bays for mounting hard disk drives installed in easily removable drive carriers.
NOTE: The hot-swap SCSI hard disk drive bays contain a hot-swap
back plane that require an 80-pin single connector attachment (SCA)
connector on the drives that you install.
The CD/FD bay includes the standard CD-ROM/FDD module.
General Description 2-17