NEC Express5800/120Rh-2 User Manual page 313

9-46 Upgrading Your Server
Installation
1.
See the section "Preparing for Installation and Removal" described earlier to prepare.
2.
Pull out the server from the rack.
3.
Open the drive cover and logic cover.
4.
While pulling the lever toward the right side of the server, pull the CD/FD out of the
chassis.
IMPORTANT:
removing the CD-ROM/floppy disk drive. Otherwise, your fingers may
be caught.
5.
While pushing the latching tab that secures the device bay, push the device carrier out of
front of the server.
IMPORTANT:
excess force. If the tab bends, straighten it out as it was.
Do not touch any other part than release lever when
Be careful not to bend the latching tab by applying