NEC Express5800/120Rh-2 User Manual page 154

12.
Copy the modules for the optional mass storage driver.
If you want to install the optional mass storage driver, insert the floppy disk attached to
mass storage driver into the floppy disk drive and follow the message to operate the
installation.
NOTE: This function requires mounting a floppy disk drive on your
server.
13.
Remove NEC EXPRESSBUILDER CD-ROM from the CD-ROM drive according to the
message.
If you proceed the setup by using setup parameter file, remove the floppy disk from the
floppy disk drive.
Insert Windows Server 2003 CD-ROM into the CD-ROM drive.
[Agree Software License Agreement] screen appears.
14.
Read the contents carefully and click [I agree.] or press F8 if you do agree. If you do not
agree, click [I disagree] or press F3.
IMPORTANT:
If you do not agree to this agreement, the setup terminates and
Windows Server 2003 will not be installed.
If "NetWare Gateway (and Client) Service" is specified to install,
the window to specify the details of "NetWare Gateway (and
Client) Service" pops up on the first logon. Specify the
appropriate value.
Now the Setup using Express Setup has completed.
Installing the Operating System with Express Setup 5-11