NEC Express5800/120Rh-2 User Manual page 160

Installing SCSI Controller Driver (N8103-65F/75)
If you utilize SCSI controller driver (N8103-65F/75), install it according to the following procedure:
Start [Device Manager] from [Start] menu → [Control Panel]→ [Administrative Tools] →
1.
[Computer Management].
2.
Double-click the SCSI Controller driver which Device Manager lists as unknown device.
3.
Click [Update Driver].
4.
When the "Update Device Driver Wizard" appears, select "Install from a list or specific
location [Advanced]" and click [Next].
5.
Select "Don't search. I will choose the driver to install" and click [Next].
6.
Click [Have Disk..].
7.
Insert "Windows Server 2003 OEM-DISK for NEC EXPRESSBUILDER" into the floppy
disk drive, enter "a:\" into "copy manufacturer's file from:" and click [OK].
8.
Specify the following driver and click [Next].
[INITIO INI-A10XU2W PCI SCSI Controller]
[Adaptec SCSI Card 29320ALP -Ultra320 SCSI] (When N8103-75 board is installed.)
The installation of the driver is completed.
Restart the system according to the message appeared on the screen.
Installing SCSI Controller Driver (N8103-56/N8190-126)
If you utilize SCSI controller driver (N8103-56 or N8190-126), update your system with NEC
EXPRESSBUILDER CD-ROM attached to your system.
The SCSI controller driver will be installed automatically.
Installing the Operating System with Express Setup
(When N8103-65F board is installed.)
5-17