NEC Express5800/120Rh-2 User Manual page 40

Nec servers user's guide
Hide thumbs Also See for Express5800/120Rh-2:
Table of Contents

Advertisement

11
UID (Unit ID) switch
Press this switch to turn on/off the UID lamps on the front and rear panels of the server.
Pressing the switch once turns on the lamps.
12
DUMP switch
Press this switch to dump memory.
13
Serial port A (COM A) connector
Connect device having a serial interface to this connector. Use COM B connector to
communicate with the remote console. A leased line cannot be connected directly to this
connector.
14
USB connectors
Connect device compliant with the USB interface to this connector.
15
VGA connector
Connect the display unit to this connector.
16
LINK/ACT lamp (green)
This lamp indicates the access status of the LAN.
17
LAN connectors
Connect network systems on the LAN to the connectors.
The number "1" following the bold-faced number indicates LAN port 1, and the number "2"
indicates LAN port 2.
18
Speed lamp (amber)
This lamp indicates the transmission speed of the LAN.
General Description
Pressing it again turns them off.
2-7

Advertisement

Table of Contents
loading

This manual is also suitable for:

N8100-1061fN8100-1062fN8100-1063f

Table of Contents