NEC Express5800/120Rh-2 User Manual page 177

5-34 Installing the Operating System with Express Setup
8.
Confirm or modify the parameters of disk array configuration.
NOTE: If you do not use disk array controller, go on the next step.
If a Disk array controller is connected to the server or the HostRAID is enabled, the
[Configure RAID] dialogue-box appears. Confirm the parameters, modify if necessary,
and then click [Next].
When the dialogue-box is closed, the Express setup automatically performs the RAID
configuration, creating Maintenance partition and installing several utilities.
9.
Select the installing Operating system.
Select "Windows" from the menu.
10.
Select the Windows family.
Select "Microsoft Windows Server 2003 Standard Edition Microsoft Windows Server
2003 Enterprise edition" category.
NOTE: If you select "Skip" at step 8, this menu does not appear.
Go on the step 13.
11.
Next, [Basic Information] wizard appears. Confirm the parameters, modify if necessary,
and then click [Next].
After that, click [Next], [Back], or [Help] on the screen to continue. Modify the
parameters each time if necessary.