NEC Express5800/120Rh-2 User Manual page 306

With N8103-80F/81F disk array controller connected
Mother board
REAR
N8103-80F/81F
disk array controller
To use the internal hard disk drives in disk array
configuration, disconnect the standard SCSI cable from
the SCSI connector on mother board, and connect it to the
connector on disk array controller board.
With N8103-86F disk array controller connected and internal SCSI backup device
connected (exclusive use with onboard SCSI connector)
Mother board
REAR
N8103-86F
disk array controller
SCSI connectors
Connect the SCSI cable to the SCSI connector on
mother board to configure the disk array.
K410-130(00)
Upgrading Your Server
Internal backup
device
Hard disk
drive
SCSI ID3-5
Hard disk
drive
SCSI ID0-2
SCSI backplane
Internal SCSI
backup device
Hard disk
drive
SCSI ID3-5
Hard disk
drive
SCSI ID0-2
SCSI backplane
9-39
FRONT
FRONT