Unpacking The System; Installing The Server - NEC Express5800/120Rh-2 User Manual

UNPACKING THE SYSTEM

When you receive your system, inspect the shipping containers prior to unpacking. If the shipping
boxes are damaged, note the damage, and if possible, photograph it for reference. After removing
the contents of the containers, keep the cartons and the packing materials. If the contents appear
damaged when you unpack the boxes, file a damage claim with the carrier immediately.

INSTALLING THE SERVER

This subsection provides the instructions for the rack-mount server unit into a standard EIA 19-inch
rack cabinet.
Also this subsection describes the removal procedures for the rack-mount server unit from the
19-inch rack cabinet.
Observe the following instructions to use the server safely.
these instructions may result in death or serious personal injury.
1-3 to 1-8 for details.
Observe the following instructions to use the server safely.
these instructions may cause a fire, personal injury, or property damage.
pages 1-3 to 1-8 for details.
Do not use any rack which does not conform to the relevant standard.
Disconnect the power cord(s) before installing or removing the server.
Do not leave more than one device being pulled out from the rack.
Do not lift the server only by a single person.
Always install the server in the specified place.
Do not install the server on the rack leaving the cover removed.
Do not pinch your finger with mechanical components.
Setting Up Your Server
WARNING
CAUTION
3-5
Failure to follow
See pages
Failure to follow
See