NEC Express5800/120Rh-2 User Manual page 107

4-10 Configuring Your Server
PCI Configuration
– Embedded SCSI submenu
Option
SCSI Controller
Option ROM Scan
– Embedded NIC (Dual Gbit) submenu
Option
LAN Controller
Option ROM Scan
– Embedded Video Controller submenu
Option
Onboard VGA
Control
Option
PCI Slot 1B/2B/3B
Option ROM
PCI Slot 1C/2C/3C
Option ROM
Option
Option PCI-X
Riser Support
PCIe Option Mode
Parameter Description
[Enabled] Enables or disables the onboard SCSI
Disabled controllers.
[Enabled] If Enabled, initialize device expansion
Disabled ROM.
Parameter Description
Disabled If Disabled, the BIOS will hold the
[Enabled] embedded chip in reset. In this
configuration, the controller hardware is
completely disabled, and will be invisible to
the PnP operating systems.
[Enabled] If Enabled, initialize device expansion
Disabled ROM.
Parameter Description
Disabled If Disabled, the BIOS will hold the
[Enabled] embedded chip in reset. In this
configuration, the controller hardware is
completely disabled, and will be invisible to
the PnP operating systems.
Parameter Description
Disabled
Used to enable or disable an option ROM
[Enabled]
on a PCI board connected to the full-height
riser card.
Disabled
Used to enable or disable an option ROM
[Enabled]
on a PCI board connected to the low-profile
riser card.
Parameter Description
[Disabled]
Used to enable or disable an option
Enabled
N8116-02 Riser Card (PCI-X).
[Disabled]
It cannot be used with this equipment.
Enabled
Please do not change.
Your Setting
[ ]: Factory-set
Your Setting
[ ]: Factory-set
Your Setting
[ ]: Factory-set
Your Setting
[ ]: Factory-set
Your Setting
[ ]: Factory-set