Setup Options
The Setup menu enables you to customize options which are specific to the machine, such as
Language and Power Save and Emulation settings. A password may be required to access and change
these Setup settings.
You may also set up the network using the machine's display screen. Before doing that, you must have
the relevant information concerning the type of network protocols and computer system you use. If
you are not sure which setting to use, contact your System Administrator to configure this machine on
the network. A password may be required to access and change the Network Setups.
The Setup menu items fall into the following groups:
•
System Setup
•
Emulation
•
Network Setup
A description of the options available for each follows.
System Setup
The following System Setup feature options are available:
Option
Language
Power Save
Wakeup Event
Description
Use this option to set the message display
language.
Use this option to set the time the
machine waits before entering power save
mode. When the machine does not receive
data for an extended period of time,
power consumption is automatically
lowered.
Use this option to determine what 'wakes'
the machine up from power save mode.
• Button Press: When you press any
button the machine will 'wake up'
from the power save mode.
• Printer: When you open or close the
paper tray, the machine will 'wake up'
from the power save mode.
Settings
* denotes factory default
•
English *
•
List of Available Languages
•
1 Min*
•
5 Min
•
10 Min
•
15 Min
•
20 Min
•
30 Min
•
45 Min
•
60 Min
•
120 Min
•
Button Press*
• Printer
Xerox Phaser 3320DN/3320DNI
User Guide
Setup Options
81