Setup Menu - Xerox Phaser 3320DN User Manual

Setup Menu

The Setup menu enables you to customize options which are specific to the machine, such as
Language and Power Save and Emulation settings. A password may be required to access and change
these Setup settings.
You may also set up the network using the machine's display screen. Before doing that, you must have
the relevant information concerning the type of network protocols and computer system you use. If
you are not sure which setting to use, contact your System Administrator to configure this machine on
the network. A password may be required to access and change the Network Setups.
The following table shows the available options for each menu item. For more detailed information
refer to Machine Features and Setups
System Setup
• Language
• Power Save
• Wakeup Event
• Auto Continue
• Paper Subst.
• Paper Mismatch
• Tray Chaining
• Default Paper
• Metric Default
• Altitude Adj.
• Line Term.
• Job Timeout
• Config. Page
• Maintenance
- Supplies Info
- Toner Low Alert
• Toner Save
• Earth Smart
• Clear Setting
Note: Some menu options may be unavailable depending on your machine configuration. You
may be required to enter a password before making setup changes.
on page 75.
Emulation
• Emulation Type
• Setup:
• Setup-PCL
- Typeface
- Symbol
- Courier
- Pitch
- Lines
- Wide A4
• Setup-Postscript
• Setup-EPSON/IBM
- Font
- Character Set
- Character Tab
- Pitch
- LPI
- Autowrap
Network Setup
• TCP/IP(IPv4)
• TCP/IP(IPv6)
• Ethernet Speed
• 802.1x
- Off
- On
• Wireless (Phaser 3320DNI only)
• Clear Setting
• Network Conf.
• Net. Activate
• HTTP Activate
Xerox Phaser 3320DN/3320DNI
User Guide
Menu Overview
11