Software - Xerox Phaser 3320DN User Manual

Software

After you have set up your machine and connected it to your computer, you must install the printer
software. The software is supplied on the CD delivered with your machine, or can be downloaded from
www.xerox.com. The following software is provided:
CD OS
Printer Windows

Software

CD
Printer Linux
Software
Printer Unix
Software
Printer Macintosh
Software
CD
• Printer Driver: Use the printer driver to take full advantage of your
printer's features. PCL6, Postscript and XPS drivers are provided.
• Xerox Easy Printer Manager (EPM): Conveniently combines access to
device settings, printing environments and the launch of applications
such as Xerox CentreWare Internet Services into one location.
Note: Login is required to change Printer Settings.
• Wireless Setting Program: When installing the Phaser 3320DNI you can
use the Wireless Setting program that was automatically installed with
the printer driver to configure the wireless settings.
• SetIP program: A utility program allowing you to select a network
interface and manually configure the addresses for use with the TCP/IP
protocol.
• Printer Driver: Use this driver to take full advantage of your printer's
features.
Note: Linux software is available on xerox.com only.
• Printer Driver: Use this driver to take full advantage of your printer's
features.
Note: Unix software is available on xerox.com only.
• Printer Driver: Use this driver to take full advantage of your printer's
features.
• SetIP program: A utility program allowing you to select a network
interface and manually configure the addresses for use with the TCP/IP
protocol.
• Smart Panel: This utility enables remote management, displaying toner
levels, printer status and problem alerts.
Contents
Xerox Phaser 3320DN/3320DNI
Software
13
User Guide