Table of Contents
Advertisement
Troubleshooting
LED
Orange
Wireless LED
Blue
(Phaser 3320DNI
only)
Redistributing Toner
When the print cartridge is near the end of its life:
•
White streaks or light printing occurs.
•
Prepare new cartridge or Replace new cartridge message appears on the display.
If this happens, you can temporarily improve print quality by redistributing the remaining toner in the
cartridge. In some cases, white streaks or light printing will still occur even after you have redistributed
the toner.
1.
Press the release latch on the left side of the machine.
2.
Open the front door.
3.
Pull the print cartridge out.
4.
Slowly shake the cartridge five or six times to distribute
the toner evenly inside the cartridge.
Note:
If toner gets on your clothing, wipe it off with a dry
cloth and wash clothing in cold water. Hot water sets
toner into fabric.
CAUTION:
Do not touch the green underside of the print
cartridge. Use the handle on the cartridge to avoid
touching this area.
94
Xerox Phaser 3320DN/3320DNI
User Guide
Color
Status
Blinking
On
Description
• A minor error has occurred and the machine is
waiting for the error to be corrected. Check the
display message. When the problem is resolved, the
machine resumes.
• The print cartridge is near its estimated end of life.
Prepare a new cartridge for replacement. You may
temporarily increase the printing quality by
redistributing the toner - see
page 94.
This is the default setting. Also shows blue when the
machine is connected to a wireless network. (Phaser
3320 DNI only.)
1
Redistributing Toner
on
3
2
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
