Table of Contents
Advertisement
Paper Tray Messages
Message
Tray 1 Empty
Tray 2 Empty
Bypass Tray Empty
Tray 2 is open
OutputBin Full
Network Messages
Message
Network Problem
IP Conflict
802.1x
Network Error
Miscellaneous Messages
Message
Door Open
Close it
Error [error number]
Call for service
Error [error number]
Turn Off then On
Meaning
There is no paper in tray 1.
There is no paper in tray 2.
There is no paper in the bypass tray.
Tray 2 has not been pushed in.
The output tray is full.
Meaning
The network IP address you have set
is being used by someone else.
Fail to authenticate.
Meaning
The front cover or rear cover is not
securely closed.
A system error has occurred
The machine unit cannot be
controlled.
Suggested solutions
Load paper in tray 1 (see
Paper Tray 1 and Paper Tray 2
(optional)
on page 66).
Load paper in tray 2 (see
Paper Tray 1 and Paper Tray 2
(optional)
on page 66).
Load paper in the bypass tray (see
Using the Bypass Tray
on page 67).
Push Paper Tray 2 fully into the
machine.
Remove paper from the output tray,
the printer resumes printing.
Suggested solutions
Check the IP address and reset it if
necessary (see the
System
Administrator
Guide).
Check the network authentication
protocol. If the problem persists,
contact your network administrator.
Suggested solutions
Close the door until it locks into place.
Reboot the power and try the printing
job again. If the problem persists,
please call for service.
Reboot the power and try the printing
job again. If the problem persists,
please call for service.
Xerox Phaser 3320DN/3320DNI
User Guide
Troubleshooting
Loading
Loading
103
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
