Cleaning The Machine; Internal Areas - Xerox Phaser 3320DN User Manual

Toner information and the number of pages printed is displayed.

Cleaning the Machine

WARNING: When cleaning the machine do NOT use organic or strong chemical solvents or
aerosol cleaners. Do NOT pour fluids directly onto any area. Use supplies and cleaning materials
only as directed in this documentation. Keep all cleaning materials out of the reach of children.
WARNING: Do not use pressurized air-spray cleaning aids on or in this equipment. Some
pressurized air-spray containers contain explosive mixtures and are not suitable for use in
electrical applications. Use of such cleaners can result in a risk of explosion and fire.
Control Panel, Paper Trays and Output Tray
Regular cleaning keeps the display, control panel and other machine areas free from dust and dirt.
1. Use a soft, lint-free cloth, lightly dampened with water.
2. Wipe clean the entire area of the control panel, including the display.
3. Wipe clean the output tray, paper trays and other outside areas of your machine.
4. Remove any residue with a clean cloth or paper towel.

Internal Areas

During the printing process, paper, toner, and dust particles can accumulate inside the machine. This
can cause print quality problems, such as toner specks or smearing. Cleaning inside the machine clears
and reduces these problems.
1. Turn the machine off and unplug the power cord. Wait
for the machine to cool down.
2. Press the release latch on the left side of the machine
and open the front door.
3. Pull the print cartridge out and place it on a clean flat
surface.
CAUTIONS:
• To prevent damage to the print cartridge, do not
expose it to light for more than a few minutes. Cover
it with a piece of paper, if necessary.
• Do not touch the green surface on the underside of
the print cartridge. Use the handle on the cartridge to avoid touching this area.
1
3
Xerox Phaser 3320DN/3320DNI
User Guide
General Care
2
91