Resolving A Ribbon Out Error - Fargo DTC400 User Manual

RESTRICTED USE ONLY

Resolving a Ribbon Out Error

All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer.
Step Procedure
1 Review the following information.

Symptom: Printer will not print.

Printer Error State: The Ribbon Sensor has detected the End Of Ribbon
mark

LCD Error Display: Ribbon Out

Driver Monitor Error Display: Ribbon Out
2 Replace the Ribbon Cartridge
a. Press on the Resume button.
DTC400 Card Printer/Encoder User Guide (Rev. 2.2)
Fargo Electronics, Inc.
4-23