RESTRICTED USE ONLY
Reviewing the Persona C11/M11 Sequence of Operations
The following sequence describes a full color print job with magnetic encoding.
Step Process
1
The File information is received from the PC
2
Printer checks the installed Ribbon type stored in memory against the Ribbon type
command that was sent from the Printer.
a. If Ribbon type does not match, the media light will begin flashing.
3
The Card Input Motor and print Stepper Motor engage.
4
The Card Feed Sensor detects leading edge of card and disengages the card
input Motor.
Card Cleaning Roller
Power Button
and LED
Persona C11 Card Printer and Persona M11 Card Printer User Guide (Rev. 5.0)
Top Cover
Release Tab
Printhead
Media Button
and LED
Fargo Electronics, Inc.
Continued on the next page
vi