Remove/Replace The Stepper Drive Motor (D930027) Remove/Replace Stepper Belt F000424 Remove/Replace Pulley D900430 - Fargo C50 Service Manual

3.2 Remove/Replace the Stepper Drive Motor (D930027)
Remove/Replace Stepper Belt F000424
Pulley D900430
D930028 is Complete Assembly shown
Step Procedure
1
2 Remove Covers.
3 Lay printer on its front.
Remove the cable harness (D930600) from the Stepper Motor.
August 2013
HID GLOBAL CONFIDENTIAL AND/OR PROPRIETARY INFORMATION. This document contains confidential and/or proprietary information,
which may not be duplicated, published, disseminated or disclosed, or used for any purpose, without the written consent of HID Global
Corporation. If you are an unintended recipient of this information or are unwilling to accept the above restrictions, please immediately return
this document to HID Global Corporation, 15370 Barranca Pkwy, Irvine, CA 92618-3106..
Caution: Turn OFF the Printer and unplug the power cord from the Printer.
C50 Card Printer Service Manual PLT-01278 rev 1.1
Tools needed: T10 Torx screwdriver
E CLIP tool
Estimated Repair Time: 30 min
Preparation: Remove the Covers
Important: This procedure can only be performed by
authorized service personnel.
Remove/Replace
Page 13