Resolving The Card Surface Debris Problems - Fargo Persona M110 User Manual

RESTRICTED USE ONLY

Resolving the Card Surface Debris problems

Symptom: Prints have spots (white or colored voids) and/or dust on them.
Step Procedure
1 Be sure the cards are clean and stored in a dust-free environment. Do not use
cards with embedded contaminants in the surface.
2 Clean the inside of the Printer. See Cleaning the Printer's Interior procedure in
Section 4, page 185.
3 Clean the Platen Rollers. See Cleaning the Platen Rollers procedure in Section
4, page 184.
4 Clean the Cleaning Roller. See Cleaning the Card Feed and Cleaning Rollers in
Section 4, page 181.
Persona C11 Card Printer and Persona M11 Card Printer User Guide (Rev. 5.0)
Fargo Electronics, Inc.
55