Table of Contents
Advertisement
RESTRICTED USE ONLY
Printer Components: Print Ribbons
To make it easier to remember which print Ribbons are which, a letter code has been
developed to indicate the type of Ribbon panels found on each Ribbon. This letter code is as
follows:
= Resin Black Panel
= Clear Protective Overlay Panel
Printer Components: Resin-Only Print Ribbons
Resin-only print Ribbons consist of a continuous roll of a single resin color. No protective
overlay panel (O) is provided since resin images do not require the protection of such an
overlay. The following resin-only Ribbon types are available for use with the Persona M30:
Type
Standard Resin Black
(K) (provides 1,000
prints)
Premium Resin Black
(K) (provides 1,000
prints)
Colored Resin
(provides 1,000 prints)
Metallic Resin
(provides 500 prints)
Persona M30 Card Printer User Guide (Rev. 1.0)
Description
This Ribbon provides high resin durability ideal for most
general-purpose monochrome ID card applications. Resin black
bar codes are readable by both infrared and visible-light bar
codes scanners.
This Ribbon provides maximum resin durability ideal for
applications such as access control where cards are repeatedly
swiped through a Magnetic Stripe reader. Resin black bar codes
are readable by both infrared and visible-light bar codes
scanners.
(Note: Using a Premium Resin Black Ribbon will provide better
photo realistic output.)
Several colored resin Ribbons are available in a variety of colors
for customizing or color-coding resin-only ID cards.
Metallic resin Ribbons are available for printing resin images
with a unique metallic sheen.
Fargo Electronics, Inc.
2-7
Advertisement
Table of Contents
