Setting The Dip Switch Settings - Fargo Persona M110 User Manual

RESTRICTED USE ONLY

Setting the DIP Switch Settings

The capital letter "X" indicates that the switch should be set to ON or DOWN.
SW1 SW2
X X
X
X
X X
X
Persona C11 Card Printer and Persona M11 Card Printer User Guide (Rev. 5.0)
SW3 SW4 Diagnostic modes
X X Test5x3, Wrinkle, Gray15x3, ResTest,
Gray15K, Steps is a standard YMCKO test
card.
X X Mag123A is a mag-only test card (records on
the Magnetic Stripe).
The RibTest calibrates the Ribbon Color
Sensor (none or anything except Mono
Resin).
X X The ResinTest is a premium resin test card.
X X The TestCore allows reading of the core pins.
In this mode, the Printer will beep every time
a core pin is detected in the Ribbon Roll.
X X RegTest is for YMCKO.
Fargo Electronics, Inc.
69