Using The Image Darkness Option - Fargo Persona M110 User Manual

RESTRICTED USE ONLY

Using the Image Darkness option

Use this option to set the overall darkness of the printed image by increasing or decreasing
the amount of heat used by the Printhead when printing.
Step Procedure
1 Lighten the printed image by clicking the down arrow
value and decrease the amount of Printhead heat.
OR
Darken the image by clicking the up arrow
increase the amount of Printhead heat.
Maximum Adjustment Range: The maximum adjustment range is ±100.
avoid accidentally over-adjusting the Printhead heat.
jam or even break.
Persona C11 Card Printer and Persona M11 Card Printer User Guide (Rev. 5.0)
Caution #1: For best results, make slight adjustments of only ± 4 to
Caution #2: If the positive value is set too high, the print ribbon may
Fargo Electronics, Inc.
to enter a negative
to enter a positive value and
80