Resolving A Card Not Fed Error (Two (2) Or More Card Feed At The Same Time) - Fargo HDP100 User Manual

RESTRICTED USE ONLY
Resolving a Card Not Fed Error (Two (2) or more card feed at the
same time)
All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer.
Step Procedure
1 Review the following information.

Symptoms: Two or more cards feed at the same time causing the
cards to jam at the Card Hopper Roller. Printer is out of cards.

Printer Error State: Card is not being detected by card TOF Sensor 11
sec after the initiation of a print job causing the Printer to produce an
error

LCD Error Display: Multiple Feed

Driver Monitor Error Display: Unable to Feed Card
HDP100 High Definition Card Printer/Encoder User Guide (Rev. Beta)
Fargo Electronics, Inc.
27