Operator Panel Buttons Removal; Outer Shield Removal - Toshiba e-STUDIO500P Service Manual

Operator panel buttons removal

The operator panel and navigation buttons are in a single kit.
1.
Remove the operator panel board. See
2.
Remove the functional rubber sheet (A) and the rubber dome sheet (B).
3.
The navigation buttons and the select button can be removed by releasing the clips (C) on the back of the
upper front cover.

Outer shield removal

1.
Remove the left door. See
2.
Loosen the outer shield mounting screws (A), and remove the shield by sliding up.
"Operator panel board removal" on page
"Left door removal" on page
A(202)
A(202)
4-66.
4-6.
Repair information
4-67