Diagnostics mode
Entering Diagnostics mode
1.
Press and hold
2.
Turn on the printer.
Release the buttons when Performing Self Test displays.
3.
Available tests
The tests display on the operator panel in the order shown:
Diagnostics mode tests
REGISTRATION
Bottom Margin
Top Margin
Left Margin
Right Margin
Quick Test
PRINT TESTS
Tray 1
Tray 2 (if installed)
Tray 3 (if installed)
Tray 4 (if installed)
Tray 5 (if installed)
MP Feeder
Env Feeder (if installed)
Prt Quality Pgs
HARDWARE TESTS
Panel Test
Button Test
DRAM Test
CACHE Test
Parallel Wrap
Parallel 1 Wrap (if installed)
Parallel 2 Wrap (if installed)
Serial 1 Wrap (if installed)
Serial 2 Wrap (if installed)
3-2
Service Manual
and
.
See
"REGISTRATION" on page 3-4
See
"Quick Test" on page 3-5
See
"Input source tests" on page 3-6
See
"Print quality pages (Prt Quality Pgs)" on page 3-6
See
"Panel Test" on page 3-7
See
"Button Test" on page 3-7
See
"DRAM Test" on page 3-7
See
"Parallel Wrap tests" on page 3-8
See
"Serial Wrap tests" on page 3-9