Vertical TeleVantage 7.5 Using Instructions page 355

4.
5.
6.
7.
A G. U
PPENDIX SING THE
Next, the Settings dialog box opens. Choose the SIP Accounts \ Add a New SIP
Account \ Server tab.
Note:
If you accidentally exit the dialog box, right-click anywhere on the eyeBeam
phone and choose Settings to open it again.
Check
Enable this SIP account.
TeleVantage.
Under , enter the following information:
User details
Enter your name as you want it displayed to callers.
Display name.
Enter one of the following:
User name.
If you have an external station.
in your external station configuration as shown in Tools > Options, Phone \
Station Features tab. (See "Configuring a SIP phone" on page 6-14.)
If you don't have an external station.
field of the SIP account that you want to use with the phone, as
of SIP URI
shown in Tools > Options, Personal \ SIP Account tab. (See "Customizing SIP
accounts" on page 18-19.)
Password/Authentication user name.
system administrator provided (or leave blank if not required by your system).
Enter the name or IP address of the TeleVantage SIP Span to which this
Domain.
phone is registered, as provided by your administrator.
Under , check both
Domain Proxy
.
proxy
C P SIP
OUNTER ATH
This enables the eyeBeam phone to register with
Enter a name that matches the
Enter a name that matches the
Enter the authentication credentials your
Register with domain
SOFTPHONES
Userinfo
Userinfo
and
Use as outbound
field
G-5