Vertical TeleVantage 7.5 Using Instructions page 274

4.
5.
You can block outbound Caller ID on your calls using the telephone commands, as follows:
*67. Blocks outbound Caller ID. Caller ID will not be shown on your subsequent
outbound calls.
*82. Unblocks outbound Caller ID. Caller ID reverts to your custom setting. If no
custom setting is available, the system Caller ID setting is used.
18-18
requirement, because some institutions have the right to read blocked Caller ID, for
example emergency services and 800-numbers.
From the
ISDN outbound Caller ID name
options for your Caller ID name:
Your outbound Caller ID name is whatever your system
System default.
administrator has set for the TeleVantage system as a whole. The current setting is
displayed in parentheses.
Organization name.
name. Your current Organization, if one is defined, appears in parentheses. Talk to
your system administrator to request a different Organization.
Your TeleVantage user name appears as your Caller ID name.
User name.
Your outbound Caller ID name is whatever your system
Custom name.
administrator has specified as your custom name. The current name is displayed in
parentheses. Talk to your system administrator to request a different custom name.
Click .
OK
dropdown list, select one of the following
The name of your Organization appears as your Caller ID
U T V
SING ELE ANTAGE