Table of Contents
Advertisement
Frequently Asked Questions
Replacing the Ribbon Cassette
If the message "End of ribbon" is displayed during
printing, replace the ribbon cassette with a new
one.
1
Open the cover�
2
Remove the used ribbon cassette�
3
Install the new ribbon cassette�
After replace the ribbon cassette, press the
[Enter] key to resume printing from the
interrupted page.
IMPORTANT
• Dispose the used ribbon cassette according to
local government regulation.
Replacing the Print Media
To replace the print media installed in the printer
with a different one, follow the procedure below.
NOTE
• For information on the print media that can be
used with this product, refer to
"Print Media
■
For Thin Tubes (Ø1.5 mm)
1
Open the cover�
2
As shown in the figure, pull the tube out
while pressing the
the direction of the arrow�
(P�19)
3
Load the print media�
Frequently Asked Questions
(P�48)".
jam recovery lever
(P�20)
in
33
Advertisement
Table of Contents
