C Mode Entries - Campbell CR510 Operator's Manual

SECTION 1. FUNCTIONAL MODES
Keyboard Display
Entry ID: Data
B
01: XXXXX
A
02: XXXXX
A
03: XXXXX
A
04: XX
A
05: XX
A
06: X.XXXX
A
07: XXXX.
A
08: X.XXXX
A
09: XX
A
10: XX
A
11: X.XXXX
Keyboard Display
Entry ID: Data
C
01:XXXX
A
02:XXXX
A
03:XXXX
Keyboard Display
Entry ID: Data
C
12:0000
A
01:XX
1-10
TABLE 1.6-1. Description of B Mode Data
Description of Data
Program memory Signature. The value is dependent upon the
programming entered and memory allotment. If the program has
not been previously compiled, it will be compiled and run.
Operating System (OS) Signature
Memory Size, Kbytes (Flash + SRAM)
Number of E08 occurrences (Key in 88 to reset)
Number of overrun occurrences (Key in 88 to reset)
Operating System version number
Version revision number
Lithium battery voltage (measured daily)
Low 12 V battery detect counter (Key in 88 to reset)
Extended memory error counter (Key in 88 to reset)
Extended Memory time of erase, seconds
TABLE 1.7-1.

C Mode Entries

SECURITY DISABLED
Description
Non-zero password blocks entry to 1, 2, 3, A, and D
Modes.
Non-zero password blocks 4, 5, and 6 except for display.
Non-zero password blocks 5, 6, 7, 8, 9, B, and all
telecommunications commands except A, L, N, and E.
SECURITY ENABLED
Description
Enter password. If correct, security is temporarily unlocked
through that level.
Level to which security has been disabled.
0 -- Password 1 entered (everything unlocked)
1 -- Password 2 entered
2 -- Password 3 entered