Rompaq Utility Diskette Or Usb Drive Key; Current Firmware Versions - HP ProLiant ML100 Series User Manual

Automatic backup
A backup copy of the ROM image existing on the target server is made in the ROM image back
subdirectory:
\CPQSYSTEM\FWBACKUP\SYSTEM
For additional information, see the HP Online ROM Flash User Guide on the HP website
(http: //www.hp.com/support/smartstart/documentation).
Option RO Ms
Types of option ROMs include:
•
Array controller ROMs
•
Int eg rated Lights-Out (iLO) ROMs
•
Hard drive ROMs
ROMPaq utility disk
The bootable ROMPaq diskette or USB drive key contains all the necessa
image files, and the configuration files required to upgrade the ROM firm
This procedure is most effective when flashin
proximity.
To flash the ROM using ROMPaq:
Download the system ROMPaq utility diskette or USB drive key for each target server. ROMPa
1.
downloads are available on the HP website (http://www.hp.com/support).
Shut down ea
2.
for th at server.
Follo w the interactive session in the ROMPaq utility, and then select the devices to be flashed.
3.
After the ROMPaq utility flashes the ROM for the selected devices, cycle power manually to reboot
4.
the system back into the operating system.
Option ROMPaqs have been retired as an upgrade deliver
upgr ades for storage options are now delivered using Smart Com
deployment utilities.
For additional information about the ROMPaq utility, see the server documentation or the
(http: //www.hp.com/support).
Current firm ware versions
Auto ma ic firmware updates t
Subscriber's Choice (http://www.hp.com/go/subscriberschoice)
Man ual firmware updates
Download the latest firmware updates from
ette or USB drive key
ch target server, and then reboot using the correct ROMPaq diskette or USB drive key
g the ROM on a small number of servers located in close
y method for storage options. Firmware
ponents and Smart Component
the HP website (http://www.hp.com/support
up
ry system files, option ROM
ware.
HP website
).
Troubleshooting 77
q