Hp Integrated Lights-Out Virtual Floppy And Cd-Rom Drives; Creating A Diskette Image; Installing The Embedded Sata Raid Driver With A Usb Diskette Drive; Installing The Embedded Sata Raid Driver Using Virtual Floppy - HP ProLiant ML100 Series User Manual

HP Integrated Lights-Out Virtual Floppy and CD-ROM drives

LO10 0i Advanced provides diskette drive and CD-ROM drive functionality through the LO100i Virtua
Floppy and CD-ROM features.
For detailed information about LO100i Advanced, refer to the HP Integrated Ligh
HP website (http://www.hp.com/servers/lights-out

Creating a diskette image

Download the HP Embedded SATA RAID Controller driver and create a driver diskette using the
instructions on the HP website
website, c lick the link for "Support and Drivers."
Installing the Embedded SATA RAID driver with a USB diskette
drive
Boot the server, and then press F10 to enter the ROM-Based Setup Utility (RBSU).
1.
Enable the Embedded SATA RAID option under the Advanced Options section.
2.
Exit RBSU. The server will reboot.
3.
When prompted, press F8 to enter the HP Embedded SATA RAID Setup.
4.
Create an array, and then exit the HP Embedded SATA RAID Setup. The P
5.
For info rmation about creating arrays, see the following documentation:
HP Embedded SATA RAID Controller User Guide on the HP website
o
(http://ww
nVi dia ForceWare Software MediaShield User's Guide on the HP website
o
(http://h20000.www2.hp.com/bizsupport/TechSupport/Home
Install the operating system
6.
For information about installing an operating system, see

Installing the Embedded SATA RAID driver using Virtual Floppy

IMPORTANT:
information, see the HP ProLiant Lights-Out Remote Management User G
(http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp).
Ensure that a network cable is connected to the LO100 NIC port on the rear of the server.
1.
Boot the server, and then press F10 to enter the ROM-Based Setup Utility (RBSU).
2.
E nab le the Embedded SATA RAID option under the Advanced Options section.
3.
Exit RBSU. The server will reboot.
4.
Create the diskette.
5.
For more information about Virtual Floppy, see the HP ProLiant Lights-Out Remote Management User
Guide on the HP website
Insert the driver diskette into the remote PC diskette drive.
6.
(http://h20000.www2
w.hp.com/support/E_SATA_RAID_C_UG_en
("Installing an operating
The LO100i option kit is required to use the Virtual Floppy feature. For more
(http ://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp
).
.hp.com/bizsupport/TechSupport/Home.jsp
)
.jsp
system" on page 38).
the documentation that shipped with the server.
Software and configuration utilities 37
ts-Out User Guide on the
). At the
OST process will continue.
)
uide on the HP website
).
l