NOTE:
For the location of server LEDs and information on their statuses, refer to the server
documentation.
Possible causes:
•
Improperly seated or faulty internal or external component
•
Unsupported component installed
•
Redundancy failure
•
System overtemperature condition
Item
See
1
Server maintenance and service guide, located on the Easy Set-up CD,
the support CD, or the HP website
(http://www.hp.com/products/servers/platforms)
2
"Power-on problems flowchart (on page 48)"
3
"HP Insight Diagnostics"
4
•
"Hardware problems (on page 55)"
•
Server maintenance and service guide, located on the Easy Set-up
CD, the support CD, or the HP website
(http://www.hp.com/products/servers/platforms)
5
"HP contact information (on page 90)"
Troubleshooting 54