Install the expansion board.
6.
Clos
e the slot cover retainer.
7.
Connect any required internal cables to the expansion board.
8.
Re
fer
to the documentation that ships with the expansion board for more information.
Insta
ll the access panel.
9.
Do one of the following:
10.
Close or install the tow
o
Slide the server back into the rack.
o
Connect any required external cables
11.
Power up the server (on page 6).
12.
HP T s
ru ted Platform Module option
Use thes instructions to install and enable a TPM on a supported server. This procedure includes three
e
sections:
Insta
lling the Trusted Platform Module board (on page 27).
1.
Retaining the recovery key/password (on page 28).
2.
Enabling the Trusted Platform Module (on page 29).
3.
TPM installation requires the use of drive encryption technology, such as the Microsoft® Windows®
BitLocker™ Drive Encryption feature. For more information on BitLocker™, see the Microsoft website
(http://www.microsoft.com
CAUTION:
can cause hardware damage or halt data access.
When installing or replacing a TPM, observe the following guidelines:
•
Do not remove an installed TPM. Once installed, the TPM becomes a permanent part of the system
board.
er bezel, as needed.
to the expansion board.
).
Always observe the guidelines in this document. Failure to follow these guidelines
Hardware options installation 26