Electrostatic Discharge; Preventing Electrostatic Discharge; Grounding Methods To Prevent Electrostatic Discharge - HP ProLiant ML100 Series User Manual

Electrostatic discharge

Prev enting electrostatic discharge
To prevent damaging the system, be aware of the precautions you need to follow when setting up the
system or handling parts. A discharge of static electricity from a finger or other conductor may damage
system boards or other static-sensitive devices. This type of damage may reduce the life expectancy of the
device.
To prevent electrostatic damage:
•
Avoid hand contact by transporting and storing products in static-safe containers.
•
Keep electrostatic-sensitive parts in their containers until they arrive at static-free worksta
•
Place parts on a grounded surface before removing
•
Avoid touching pins, leads, or circuitry.
•
Always be properly grounded when touching a static-sensitive component or assembly.
Grou nding methods to prevent electrostatic
discharge
Seve ral methods are used for grounding. Use one or more of the following methods when handling o
insta lling electr
•
Use a wrist strap connected by a ground cord to a grounded workstation or computer chassis. Wrist
straps are flexible straps with a minimum of 1 megohm ±10 percent resistance in the ground cords.
To provide proper ground, wear the strap snug against the skin.
•
Use heel straps, toe straps, or boot straps at standing workstations. Wear the straps on both feet
when standing on conductive floors or dissipating floor mats.
•
Use conductive field service tools.
•
Use a portable field service kit with a folding static-dissipating work mat.
If you do not have any of the suggested equipment for proper grounding, have an authorized reselle
install the part.
For more information on static electricity or assistance with product installation, contact an authorized
reseller.
ostatic-sensitive parts:
them from their containers.
tions.
r
r
Electrostatic discharge 89