Close the processor socket retaining bracket and the processor retaining latch.
9.
Install the hea
10.
Insta
ll the access panel.
11.
Do one of the following:
12.
Close or install th
o
Slide the server back into the rack
o
Power up the server (on p
13.
SAS and SATA hard drive options
The HP ProLiant ML150 G6 Server sup
•
SATA hard drives only w
•
SAS or SATA hard drives with an optional SAS controller
For optimal performance, avoid mixing SAS and SATA hard drives.
To install a hard drive, see the server installation sheet on the HP website
(http://www.hp.com/go/bizsupport).
Hard drive LED cable option
An optional hard drive LED cable is required for hot-plug hard drive LED fu
storage controller.
To connect the hard drive LED cable:
Power down the server (on page 6).
1.
Do one of the following:
2.
Unlock and remove the bezel
o
Extend the server from the rack.
o
Remove the access panel (on page
3.
tsink. See the server installation sheet.
e tower bezel, as needed.
.
age 6).
ports up to eight hard drives:
ith the embedded SATA controller
("Remove the tower
6).
nctionality with an optional
bezel" on page
6).
Hardware options installation 16