Hardware Options Installation; Introduction; Processor Option - HP ProLiant ML100 Series User Manual

Hardware options installation

Introduction

If more than one option is being installed, read the installation instructions fo
and identify similar steps to streamline the installation process.
WARNING:
internal system components to cool before touching them.
CAUTION:
beginning any installation procedure. Improper grounding can cause el

Processor option

The HP ProLiant ML150 Generation 6 Server supports single- and dual-processor operation. With two
processors installed, the server supports boot functions through the proc
1. However, if processor 1 fails, the system automatically boots from proc
processor failure message.
The server uses embedded PPMs as DC-to-DC converters to provide th
CAUTION:
cache sizes. Refer to the label on the processor heatsink for a desc
CAUTION:
should attempt to replace or install the processor in this server.
CAUTION:
Handle the processor only by the edges.
•
Do not touch the bottom of the processor, especially the contact area.
•
IMPORTANT:
To install the component:
Power down the server (on page 6).
1.
Do one of the following:
2.
Unlock and remove the bezel
o
Extend the server from the rack.
o
Remove the access panel (on page 6).
3.
Open the processor retaining latch and the processor socket retaining bracket.
4.
To reduce the risk of personal injury from hot su
To prevent damage to electrical components, properly gr
To prevent possible server malfunction, do not mix proce
To avoid damage to the processor and system board, only
To avoid damage to the processor:
Processor socket 1 must be populated at all times or the server does not function.
("Remove the tower
r all the hardware options
rfaces, allow the drives and the
ound the server before
ectrostatic discharge.
essor installed in processor socket
essor 2 and provides a
e proper power to each processor.
ssors of different speeds or
ription of the processor.
authorized personnel
bezel" on page 6).
Hardware options installation 13